Operating Regulations for Lifting Platform

1. The power supply of the lifting platform is connected to the indicator light, the power supply is AC380V three-phase five-wire, and the power supply of the lifting control part is DC24V.
2. The control operation of lifting platform is self-protection type. The operation button boxes are set at the entrance and exit of each floor (the green button is 1.2.3, representing the parking floor. After the net doors of each floor are closed, the green stop button is pressed, and the lifting platform starts to run up and down to the same floor). When the lifting platform reaches the high or low position, the power is cut off by the limit switch. At this time, the entrance and exit network doors can be opened manually.
3. Press the red emergency stop button (emergency stop) when the elevator is in operation.
4. The guardrails on both sides of the lifting platform should not rely on heavy objects, which may cause damage to the guardrails and affect their use.
5. It is strictly forbidden to park handcarts without brakes during the operation of lifting platforms. When carrying goods, it is necessary to ensure the stability of cargo stacking and strictly forbid exceeding the platforms.
6. The power indicator lights on, press the up green button, the motor turns and the lifting platform does not rise. This may be the reversal of the motor after the three-phase power supply is connected back, only the power supply can be corrected.
7. It is forbidden for people to go up and down with the goods on the platform when the lifting platform is running.
8. Double-open net doors at the entrance and exit of each floor are strictly prohibited from collision. Close the doors after operation.
9. Overload operation of lifting platform is strictly prohibited.

Next:How the Hydraulic Lifting Platform Work